Investing in green extinguishers

Published:  17 February, 2016

Could the days of the standard fire extinguisher be numbered? During Intersec Dubai Jose Sanchez caught up with a bee-loving entrepreneur looking for investment in a solution which would eliminate the need for multiple extinguishers and reduce both the cost of maintenance contracts and the discharge of chemicals into the environment.

Frank Water Mist is the name of the fire extinguisher recently engineered by Frank Ryde, member of the International Water Mist Association, founder and CEO of Alpha Fire Services Pvt Ltd., Sri Lanka, founder/shareholding Director and retired CEO of Alpha Fire Services of Bahrain and Qatar.

He is attempting to commercialise the power of low-pressure water mist technology through the use of clever design and high quality, third party-accredited components.

The extinguishing capabilities of water mist are well known and, to summarise, water mist addresses all four elements required for fire to occur. A fire is a chemical reaction that involves rapid oxidation or burning of a fuel and, in order for a fire to occur, fuel, heat and oxygen need to be present for the chemical chain reaction needs to occur. While the removal of any one of these essential elements will result in the fire being extinguished, water mist’s efficacy lies in its ability to address all these elements simultaneously.

As water flashes into steam at the flame front it extracts a large amount of heat from the fire. At the same time, the volumetric expansion of steam at the flame front displaces oxygen that feeds it. Water mist droplets stop heat radiating and limit the spread of the fire while stripping smoke particles from the plume.

These unique properties are the result of the conversion of water into fine water droplets with a diameter below 1,000 microns, which increases the surface area available for heat absorption and evaporation. These droplets are therefore more effective than sprinkler water droplets in absorption, smoke scrubbing and heat blocking. And, given that the droplets are lighter, they remain airborne for longer and are therefore effective over a longer period of time.

One of the greatest advantages of water mist extinguishers lies in their versatility. They can be used on class A, B, F fires and, because water mist droplets are so small that they prevent electricity from travelling through them, class E fires (tested up to 35,000 volts).

‘In the USA, in recognition of its efficacy and superior benefits over CO2-based fire extinguishers, NASA commissioned ADA Technologies to develop high-pressure water mist fire extinguishers to be used on its spacecraft operating in outer space,’ comments Ryde, adding that high pressure water mist fire extinguishers are generally very expensive because thick, heavy, high pressure cylinder systems are required to atomise water to mist. Consequently, he invented water mist extinguisher that is pressurised at only 10 bar, which means that the cylinder is comparatively thin and less costly. The cylinder has already been tested and approved by Apragaz Belgium, TUV Germany and MPA Dresden Germany. The remaining components comprise a rotor, tubes and nozzle that together can produce over 22 billion droplets from a litre of water. Ryde explains how it works: ‘The cylinder or the tank housing maintains the contents of the extinguisher at pressure actuation. When the valve is released by manual action, the water and compressed gas travels towards the rotor via a black tube, controlled by a nozzle assembly. The rotor then starts to rotate, mixing the water and gas which travels via a white tube to the nozzle. Due to the collision of water streams, the water leaves the nozzle at high kinetic energy generating an ultra-fine mist made of water droplets as small as 25 microns in diameter.’

Ryde is convinced that the benefits of low-pressure water mist extinguishers are glaringly obvious: ‘Everywhere in the world you have to use one water and one CO2 extinguisher, or one CO2 and one powder or foam. So you pay for two extinguishers at the beginning, and then throughout its life you pay for the refilling of two extinguishers. And throughout their lives you are using a lot of chemicals – even if they are unused they still have to be topped up. Tonnes of CO2, foam and powder are being dumped continuously in the process of testing, servicing and filling. All that could be done and dusted where one cylinder does all the job.’

The system has received approvals in Sri Lanka for liquid, gas, electrical and cooking fires. ‘What we are looking for then is investment to gain LPCB, Australian, UL and Canadian approvals. I want to take it to the world,’ says Ryde who, although officially retired, is nevertheless currently building an eco-hotel in Sri Lanka.

A keen beekeeper and a man with an obvious affection for the fire protection industry, he regards water mist as a natural next step for him and an environmentally friendly, cost-effective alternative for the market.

  • Operation Florian

Sign up: eMagazine & eNewsletter

The latest issues in your inbox.

Company Profiles

Renka´s Fire Engine No. 1

Firefighting, fast, safe, everywhere. Michael Renka GmbH, based in Germany, is a manufacturer of firefighting vehicles, pumps and rescue equipment.

Waterax - We move water

Trusted by wildland firefighters around the world, WATERAX sets the industry standard by developing innovative, portable fire pumps and water-handling equipment designed to withstand demanding applications and rugged environments.

Big Water Flow for Industrial and Municipal Firefighting Applications

Protecting the lives of the public and firefighters while limiting the structural damage caused in large scale fires is our primary mission

We are committed to improving lives and doing business in the right way

We have a unique mix of capability and culture that we refer to as 3M Science and we strive to develop products that improve people’s daily lives in a multitude of ways.

HazSim - Bringing situational HazMat training to life

HazSim, LLC provides innovative simulation training to ensure your team works safely and effectively. HazSim Pro simulation equipment is in use by hundreds of fire departments, training schools, industrial fire teams, and private trainers across the US, Canada and further afield as well as the US Army.

The ultimate in innovation, quality and service

For 60 years Lehavot has been delivering the world’s most advanced fire detection and suppression automatic systems

Advancing rescue technology

The specialist supplier of quality PPE and Rescue Equipment to Emergency Services.

Revolutionizing fire fighting foam technology

The one-stop resource for fire fighting foam concentrates and custom-designed foam suppression systems hardware.

Trust the best, let us be your foam solution

AUXQUIMIA is a Spanish company whose main activity is the design, manufacture and commercialization of firefighting foam concentrates.

Williams Fire & Hazard Control offers a full line of specialized fire response equipment for oil and gas platforms

From storage tanks and pipeline emergencies to offshore platforms and vessels at sea, Williams' response personnel and specialized equipment quickly address adverse fire emergencies.

The leader in truck-mounted hydraulic platforms

Our mission is to provide the best and the safest solution to professionals that work at height.

If you want quality, you want Zico

Since its inception Ziamatic Corp has provided the men and women of the fire service with products designed to make their jobs safer and easier.

The independent alternative

Dafo Fomtec AB is a privately owned company with head office in Stockholm Sweden and manufacturing in Helsingborg in the south of Sweden.