Behind the curve

Published:  28 October, 2014

SEE VIDEO: CSB Releases safety video on fatal 2010 Tesoro Anacortes Refinery accident.

The fatal April 2, 2010 accident occurred during startup of the Washington refinery’s “naphtha hydrotreater unit” after a maintenance shut down. A nearly 40-year-old heat exchanger violently ruptured, causing an explosion and fire that fatally injured seven workers – the largest loss of life at a US refinery since 2005.

The CSB’s newly released 14-minute safety video entitled “Behind the Curve” includes a 3D animation of the events that led up to this tragic accident as well as interviews with the CSB’s investigators and chairperson.

CSB Chairperson Dr. Rafael Moure-Eraso said, “The CSB is seriously concerned by the number of deadly refinery accidents in recent years. We have concluded that extensive improvements must be made in how refineries are regulated at the state and federal level.

The CSB’s investigation found an immediate cause of the tragedy to be long-term, undetected High Temperature Hydrogen Attack (HTHA) of the steel equipment, which led to the vessel rupture on the day of the accident.  The CSB found the industry’s standard for determining vulnerability of equipment to HTHA, to be inadequate. 

In the video Investigator Lauren Grim discusses HTHA, stating: “High temperature hydrogen attack, or HTHA, – is a common hazard that has long been known within the petrochemical industry.  However, Tesoro engineers and corrosion experts did not believe it could occur within the heat exchanger that ultimately failed.”

The CSB’s investigation report, approved in May 2014, is one of the most extensive and complex refinery explosion investigations. The investigators also reported their findings of a substandard safety culture at Tesoro, which led to a complacent attitude toward flammable leaks and occasional fires over the years. And the CSB found that the complexity of the startup procedure typically required more than just the one outside operator. Yet operating procedures were not updated to account for the role of additional personnel during the hazardous non-routine work.

The CSB made recommendations in these areas to both the industry group, which issues guidance on HTHA, the American Petroleum Institute, as well as to Tesoro. 

Investigator Dan Tillema says, “The CSB found that if Tesoro had a strong safety culture, it would have addressed the ongoing leaks and defined a reasonable number of essential personnel for the startup activity. Had Tesoro done these things, we concluded that fewer workers would have been present on the night of the accident, and lives would have been spared.”

The CSB’s final report also recommended that the governor and legislature of the State of Washington significantly strengthen the oversight of refineries.  Specifically, the Board called on the state to require refineries to:

  • conduct more comprehensive hazard analyses and damage mechanism reviews;
  • document the effectiveness of process safeguards;
  • increase the role for worker representatives in process safety management
  • have company safety reviews examined by technically competent regulators

Chairperson Rafael Moure-Eraso said, “Seven lives were lost at Tesoro.  It should not have happened. Companies, workers, and communities would all benefit from a more rigorous regulatory system that is focused on continuously lowering risks.”

  • Operation Florian

Sign up: eMagazine & eNewsletter

The latest issues in your inbox.

Company Profiles

HazSim - Bringing situational HazMat training to life

HazSim, LLC provides innovative simulation training to ensure your team works safely and effectively. HazSim Pro simulation equipment is in use by hundreds of fire departments, training schools, industrial fire teams, and private trainers across the US, Canada and further afield as well as the US Army.

Revolutionizing fire fighting foam technology

The one-stop resource for fire fighting foam concentrates and custom-designed foam suppression systems hardware.

Advancing rescue technology

The specialist supplier of quality PPE and Rescue Equipment to Emergency Services.

The ultimate in innovation, quality and service

For 60 years Lehavot has been delivering the world’s most advanced fire detection and suppression automatic systems

Trust the best, let us be your foam solution

AUXQUIMIA is a Spanish company whose main activity is the design, manufacture and commercialization of firefighting foam concentrates.

Williams Fire & Hazard Control offers a full line of specialized fire response equipment for oil and gas platforms

From storage tanks and pipeline emergencies to offshore platforms and vessels at sea, Williams' response personnel and specialized equipment quickly address adverse fire emergencies.

Foam fights fire

Europe’s foremost fire fighting foam manufacturer has been developing and producing foams since the 1920s.

The leader in truck-mounted hydraulic platforms

Our mission is to provide the best and the safest solution to professionals that work at height.

The independent alternative

Dafo Fomtec AB is a privately owned company with head office in Stockholm Sweden and manufacturing in Helsingborg in the south of Sweden.

If you want quality, you want Zico

Since its inception Ziamatic Corp has provided the men and women of the fire service with products designed to make their jobs safer and easier.

Calendar