CSB Chairman Rafael Moure-Eraso commends board approval of ‘landmark’ Tesoro Refinery accident investigation, report and recommendations

Published:  06 May, 2014

Critical safety recommendations around the tragic heat exchanger explosion and fire that took seven lives at the Tesoro refinery in Anacortes in April 2010 – read Chairman Moure-Eraso’s full statement here.

'As chairman, I was pleased to be joined by my fellow board members Beth Rosenberg and Mark Griffon in unanimously voting for what I believe is a landmark report, which recommends extensive improvements to the way in which refineries are regulated at the federal and state levels.

'We took the action following a public presentation by the CSB investigation team on the report’s highlights and changes made as a result of public comments submitted on the draft report that we released on January 30, 2014.

'You are invited to read the full report here. As reported previously, we found a causal factor of the tragedy to be long-term, undetected High Temperature Hydrogen Attack (HTHA) of the steel equipment, which led to the vessel rupture on the day of the accident and the massive release of highly flammable hydrogen and naphtha.  We found the industry’s standard for determining vulnerability of equipment to HTHA, to be inadequate.  We also found Tesoro’s safety culture to be lacking, which led to a complacent attitude toward flammable leaks and occasional fires over the years.  The CSB made strong recommendations in these areas to both the industry group which issues guidance on HTHA, the American Petroleum Institute, as well as to Tesoro.

'These findings – and similar ones we have made in other refinery investigations – have led us to recommend sweeping changes to the regulatory system. We are calling on the Environmental Protection Agency to revise rules in its Chemical Accident Prevention Provisions to require the use of inherently safer systems analysis and what are called the “hierarchy of controls” to the greatest extent feasible when facilities are establishing safeguards for identified process hazards.  While this recommendation is groundbreaking for a federal agency, the application of inherent safety is broadly accepted and has been applied in industry good practice guidelines for many years.

'In the current regulatory framework, companies may identify a hazard such as HTHA - which is very difficult to identify via inspection and can lead to major process safety incidents with severe consequences such as the April 2, 2010, Anacortes incident - but they are not required to install materials that are resistant to HTHA. Until the EPA can make this change in the regulations, the board recommends the agency use its authority under the Clean Air Act’s General Duty Clause without delay.  We call on EPA to work with industry on this important reform, which will without doubt be instrumental in preventing catastrophic accidents.

'The goal is to reduce the risk of major accidents to “as low as reasonably practicable,” a concept abbreviated as ALARP.  The CSB recommends that the EPA require facilities to perform inherently safer systems analysis for all management of change, incident investigation, and process hazard analysis reviews and internal company safety recommendations, prior to the construction of a new process, process unit rebuilds, significant process repairs, and in the development of corrective actions. Workers and the public might be surprised to know that this is not currently a requirement in the chemical industry.

'We made similar wide-ranging reform recommendations to the governor and legislature of the State of Washington and the state’s chemical industry regulator, the Department of Labor and Industries – Division of Occupational Safety and Health: We call on them to augment the existing process safety management regulations for petroleum refineries in Washington with more rigorous goal-setting attributes.

'Currently, most federal and state regulations tend to require certain process safety activities, such as management of change and incident investigations, but in fact do not require actual risk reduction or continuous improvements as required company goals.  We think they should.

'We call on the legislature and governor to enhance the regulatory system in the state of Washington, and to provide more resources to fund more and better compensated inspectors. The CSB recommends that Washington require refineries to develop comprehensive process hazard analyses (PHAs) which include a rigorous analysis of process hazards and their safeguards, documented rationale of safeguard effectiveness, documented damage mechanism hazard reviews conducted by a diverse team of qualified personnel, and documented use of inherently safer systems analysis and the hierarchy of controls. 

'This more comprehensive PHA will be subject to review by the regulator. We also call on the state to ensure its regulator is technically qualified, and can thoroughly review the comprehensive PHAs and perform preventative audits and inspections.  In addition, workers and the public must have greater involvement in the prevention of major process safety incidents, and the CSB also recommends significant improvements in this area to the state of Washington.

'To the loved ones, friends and colleagues of the seven who perished from this terrible accident, and to other workers and communities elsewhere who endure chemical plant fires, explosions and releases, we dedicate the Tesoro investigation report now unanimously approved by our board.'

  • Operation Florian

Sign up: eMagazine & eNewsletter

The latest issues in your inbox.

Company Profiles

Waterax - We move water

Trusted by wildland firefighters around the world, WATERAX sets the industry standard by developing innovative, portable fire pumps and water-handling equipment designed to withstand demanding applications and rugged environments.

Big Water Flow for Industrial and Municipal Firefighting Applications

Protecting the lives of the public and firefighters while limiting the structural damage caused in large scale fires is our primary mission

We are committed to improving lives and doing business in the right way

We have a unique mix of capability and culture that we refer to as 3M Science and we strive to develop products that improve people’s daily lives in a multitude of ways.

HazSim - Bringing situational HazMat training to life

HazSim, LLC provides innovative simulation training to ensure your team works safely and effectively. HazSim Pro simulation equipment is in use by hundreds of fire departments, training schools, industrial fire teams, and private trainers across the US, Canada and further afield as well as the US Army.

The ultimate in innovation, quality and service

For 60 years Lehavot has been delivering the world’s most advanced fire detection and suppression automatic systems

Advancing rescue technology

The specialist supplier of quality PPE and Rescue Equipment to Emergency Services.

Revolutionizing fire fighting foam technology

The one-stop resource for fire fighting foam concentrates and custom-designed foam suppression systems hardware.

Trust the best, let us be your foam solution

AUXQUIMIA is a Spanish company whose main activity is the design, manufacture and commercialization of firefighting foam concentrates.

Williams Fire & Hazard Control offers a full line of specialized fire response equipment for oil and gas platforms

From storage tanks and pipeline emergencies to offshore platforms and vessels at sea, Williams' response personnel and specialized equipment quickly address adverse fire emergencies.

Foam fights fire

Europe’s foremost fire fighting foam manufacturer has been developing and producing foams since the 1920s.

The leader in truck-mounted hydraulic platforms

Our mission is to provide the best and the safest solution to professionals that work at height.

If you want quality, you want Zico

Since its inception Ziamatic Corp has provided the men and women of the fire service with products designed to make their jobs safer and easier.

The independent alternative

Dafo Fomtec AB is a privately owned company with head office in Stockholm Sweden and manufacturing in Helsingborg in the south of Sweden.