Penetration sealing systems: news and developments

Published:  29 November, 2013

Modern buildings are fitted with numerous technical installation services for power supply, computer networks and transportation of water and sewage. In many cases these services penetrate fire separations in places that are mostly hidden away above ceilings and in alcoves – so it is especially important that these penetrations are fitted with suitable protection that fulfil the fire safety requirements, writes SP Sweden project manager Stefan van de Wetering.

What are penetration seals?

Generally, a penetration seal is a system to maintain the fire resistance of a separating element at the position where technical services pass through. More specifically, these services are pipes and electrical cables (including bus bars and coaxial cables), but not ventilation systems. One condition is that the services actually pass through the separating element, thus an electrical socket is not a penetration but is part of the partition.

Determining the fire resistance

The European Committee for Standardisation (CEN) has developed standard fire resistance tests for service installations, for penetration seals in standard EN 1366-3. The edition currently in use was published in 2009. This standard describes a method of test for assessing the contribution of a penetration seal to the fire resistance of separating elements. The technical installation services that are currently covered, represent services that can commonly be found on building sites in Europe, such as cables and pipes in various configurations.

During the fire resistance test, assessments are performed to determine the integrity and insulation performance of the separating element, the sealing system and the penetrating services. The worst result obtained determines the result of the sealing system. The integrity criterion is determined by using cotton pads to capture hot gases escaping through cracks and by visual observations of sustained flaming, which is defined as continuous flames on one location for a minimum duration of 10 seconds. The insulation criterion is determined by measuring the surface temperatures on the non-exposed face of the separating element, where a temperature rise of 180 K generally constitutes a failure.

As part of CEN’s revision cycle, this particular test standard is undergoing extensive changes to make it more user friendly and better suited to products that are currently in the market. Through continuous testing and new insights, some of the current rules will change and new rules will be added for more widely used services such as conduits containing cables.

If all goes well the revised test standard will be published late 2015.

Above: cable penetration seal with mineral wool boards and ablative coating

European regulations

With the full implementation of the Construction Products Regulation (CPR) on July 1, 2013, manufacturers of constructions products have the obligation to CE mark their products when they bring them into the market in European member states. But this is only applicable if that specific product is covered by a Harmonized European Product Standard (hEN); penetration seals are not covered by a hENat the moment. However, it is still possible to obtain a CE mark for such products, but the products’ characteristics must be based upon a European Assessment Document (EAD). For penetration seals the European Organisation for Technical Assessment (EOTA) has developed European Technical Approval Guideline N° 026 (ETAG N° 026), which serves as an EAD. In addition to the fire resistance of the product or system, other product characteristics such as durability and serviceability, airborne sound insulation or reaction to fire class can, and sometimes have to, be determined. An obtained CE mark is a way for the manufacturer to declare the material properties, it is not a quality mark.

Some key players in the European market have already obtained European Technical Assessments (ETAs) for their penetration seal systems, which makes it easier to sell their products on the European market. Without these ETAs they would have had to obtain national approvals in separate European member states.

SP Technical Research Institute of Sweden

As Sweden’s National Research Institute, SP has testing facilities to determine the fire resistance of penetration seals in all possible configurations, in both vertical and horizontal constructions. Also, testing for offshore applications according to the International Code for Application of Fire Test Procedures (FTP Code) is part of SP’s services.

In addition to fire resistance testing, all other product characteristics mentioned in ETAG N° 026 Part 2 can be determined by SP. And to conclude the process for CE marking, SP can issue the ETA and CE Certificate.

About the author

Stefan van de Wetering is a project manager at SP and is mainly involved in fire resistance testing for technical installations such as penetration seals and fire dampers. He is SP’s representative in EGOLF and CEN TC 127 WG2.

  • Operation Florian

Sign up: eMagazine & eNewsletter

The latest issues in your inbox.

Company Profiles

Waterax - We move water

Trusted by wildland firefighters around the world, WATERAX sets the industry standard by developing innovative, portable fire pumps and water-handling equipment designed to withstand demanding applications and rugged environments.

Big Water Flow for Industrial and Municipal Firefighting Applications

Protecting the lives of the public and firefighters while limiting the structural damage caused in large scale fires is our primary mission

We are committed to improving lives and doing business in the right way

We have a unique mix of capability and culture that we refer to as 3M Science and we strive to develop products that improve people’s daily lives in a multitude of ways.

HazSim - Bringing situational HazMat training to life

HazSim, LLC provides innovative simulation training to ensure your team works safely and effectively. HazSim Pro simulation equipment is in use by hundreds of fire departments, training schools, industrial fire teams, and private trainers across the US, Canada and further afield as well as the US Army.

The ultimate in innovation, quality and service

For 60 years Lehavot has been delivering the world’s most advanced fire detection and suppression automatic systems

Advancing rescue technology

The specialist supplier of quality PPE and Rescue Equipment to Emergency Services.

Revolutionizing fire fighting foam technology

The one-stop resource for fire fighting foam concentrates and custom-designed foam suppression systems hardware.

Trust the best, let us be your foam solution

AUXQUIMIA is a Spanish company whose main activity is the design, manufacture and commercialization of firefighting foam concentrates.

Williams Fire & Hazard Control offers a full line of specialized fire response equipment for oil and gas platforms

From storage tanks and pipeline emergencies to offshore platforms and vessels at sea, Williams' response personnel and specialized equipment quickly address adverse fire emergencies.

Foam fights fire

Europe’s foremost fire fighting foam manufacturer has been developing and producing foams since the 1920s.

The leader in truck-mounted hydraulic platforms

Our mission is to provide the best and the safest solution to professionals that work at height.

If you want quality, you want Zico

Since its inception Ziamatic Corp has provided the men and women of the fire service with products designed to make their jobs safer and easier.

The independent alternative

Dafo Fomtec AB is a privately owned company with head office in Stockholm Sweden and manufacturing in Helsingborg in the south of Sweden.